Nikon D3 firmware update

Nikon has updated the firmware for D3.

Windows users click here: http://support.nikontech.com/cgi-bin/nikonusa.cfg/php/enduser/std_adp.php?p_faqid=74&p_sid=sej4Dqoj&p_lva=16269

Mac users click here: http://support.nikontech.com/cgi-bin/nikonusa.cfg/php/enduser/std_adp.php?p_faqid=16270&p_sid=sej4Dqoj&p_lva=13783

According to Nikon the following features are modified by firmware

Modifications enabled with upgrade of A and B firmware to v.2.01

• Geodetic information is now displayed in ViewNX 1.2.0 or later and Capture NX 2 2.1.0 or later shooting information for images captured with the GPS Unit GP-1 mounted on the camera.
• Autofocus-response performance in focus mode C (Continuous-servo AF mode) with relatively dark subjects has been increased.
• When the AF-ON button is pressed, the monitor turns off and a focus point can now be selected using the multi selector.
• Photo information displayed in full-frame playback has been modified as follows:
• • HI-, LO- has been changed to Hi, Lo
  • WARM TONE has been changed to WARM FILTER
  • COLOR CUSTOM has been changed to COLOR BALANCE
• Manamah, displayed in the Time zone options for the World time item in the setup menu, has been changed to Manama.
• An issue that, in extremely rare cases, resulted in noticeable black dots in images captured with Long exp. NR in the shooting menu set to On has been resolved.
• When the Speedlight SB-800 was mounted on the camera with flash mode set to Distance-priority manual (GN) mode, and then the exposure meters were reactivated or the camera was turned on, the distance information displayed on the SB-800 changed. This issue has been resolved.
• An issue that, in some rare cases, caused images captured with the following lenses to be under-exposed, has been resolved.
• • AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED
  • AF VR Zoom-Nikkor 80-400mm f/4.5-5.6D ED (5.0x)

Instructions to update firmware found in the links.